Custom laboratory work surfaces in both 1” (2.5 cm) thick black epoxy resin and phenolic resin. They are designed and engineered to suit your needs. Can be ordered in different depths, with special edge details, with extra high back-splashes, or a variety of cutouts.
Ship within 6 Business Days
Steel Components can be painted “Pearl White
Chemical Resistant Black Phenolic Rein available
1″ Thick
Front Edge Finish
Notched around standards to create a pass-thru shelf
Contact us for full details
Balance modular lab benches provide a stable and vibration resistant work-space for sensitive procedures.
Work tops are 2″ thick. Top, sides and middle supports are all constructed from epoxy black resin material.
Many bench styles are available. Contact your Lab USA furniture specialist for further details.
Leveling Glide- Fixed Height
1/2” glide with a 1/2” stem thread. All tables with leveling glides are rated for 2000 lbs.
Casters- Fixed Height
Locking swiveling casters. Tables with casters are rated for 960 lbs.
Heavy Duty Casters -Fixed Height
Extra heavy-duty locking, swiveling Casters. Rated for 2000 lbs. Leveling foot pad provides vibration isolation.
Adding Shelving to Existing Lab Benches
You do not need new benches to get bench shelving. Bench-mounted uprights and phenolic shelves can be added to most existing lab benches, including center islands where the shelves need to be reached from both sides. The fit depends on the bench top material and on what is mounted on or under the bench.
What to plan for
- Bench-mounted uprights or reagent poles: Painted steel poles bolt through the work surface. Set down the centerline of an island bench, they carry tiered shelves that can be reached from both sides.
- Several sections instead of one long unit: Shorter runs are easier to fit around sinks, service fixtures and equipment, and they let you set different shelf heights along the bench.
- Shelf material, depth and rear lips: 1-inch chemical-resistant phenolic resin shelves are the usual choice. Rear retaining lips keep items from being pushed off the back of island or peninsula shelving.
- Know your bench top: Epoxy resin, phenolic resin, steel and wood tops are fastened differently. If you are not sure what yours is, a photo of the edge and the underside lets us confirm the mounting method before quoting.
What to send for a quote
Bench length, top material (or a photo), whether the shelves must be reachable from one side or both, the shelf depth and number of tiers you want, what will be stored on them, and anything on the bench the shelving has to clear, such as sinks or gas and power fixtures. Send it through our contact form or call (801) 855-8560.
Shop Lab Benches and Riser Kits Online
Bench frames and workbench kits you can order directly. Request a quote for modular benches and bench-mounted shelving sized to your lab.
Common Questions
Can shelving be added to an existing lab bench top?
Usually, yes. Bench-mounted uprights bolt through the work surface, so we confirm the top material, its thickness and what sits underneath (cabinets, drawers or service lines) before quoting. Tell us the bench length and whether the shelves need to be reachable from both sides.
How high can you store items on center island bench shelves?
Keep stored items at least 18 inches below sprinkler heads. In rooms without sprinklers, fire codes commonly require storage to stay at least 24 inches below the ceiling. Keep heavy items and chemical containers on the lower shelves, at or below eye level.
