Cleanrooms demand furniture that won’t compromise your controlled environment. Every surface, joint, and material must minimize particle generation while withstanding rigorous cleaning protocols. Labs USA supplies ISO 5 through ISO 8 classified cleanroom furniture — workstations, tables, gowning benches, storage systems, and pass-throughs — for pharmaceutical, biotech, semiconductor, hospital, and research cleanrooms.
Cleanroom Furniture by Application
Cleanroom Workstations
- Stainless steel workstations — electropolished 304/316L surfaces, fully welded construction, no exposed fasteners
- ESD-safe workstations — static-dissipative surfaces for electronics and semiconductor cleanrooms
- Perforated workbenches — allow unidirectional airflow through the work surface for ISO 5 environments
- Adjustable-height stations — manual or electric height adjustment for sit/stand flexibility in gowning
Cleanroom Tables
- Electropolished stainless steel tops — the gold standard for ISO 5-7
- Powder-coated steel — cost-effective for ISO 7-8 environments
- Vibration-isolation tables — for precision instruments, metrology, and microscopy
- Nested tables — stack when not in use to maximize cleanroom floor space
Gowning Room Furniture
- Gowning benches — step-over design separates dirty and clean sides
- Boot storage racks — angled shelving for cleanroom booties and shoe covers
- Garment storage — open wire shelving or enclosed cabinets for cleanroom garments
- Sticky mat frames — recessed frames for adhesive floor mats at gowning room entry
Cleanroom Storage & Shelving
- Wire shelving — open design supports HEPA airflow patterns; chrome or stainless steel
- Solid shelving — stainless steel for aseptic environments where wire shelving creates turbulence
- Desiccator cabinets — humidity-controlled storage for moisture-sensitive components
- Pass-through chambers — interlocking doors between cleanroom zones to prevent cross-contamination
Material Selection by ISO Class
| ISO Class | Typical Use | Furniture Material | Key Requirement |
|---|---|---|---|
| ISO 5 (Class 100) | Aseptic fill, wafer fab | 316L stainless, electropolished | Zero particle shedding, perforated for airflow |
| ISO 6 (Class 1,000) | Sterile compounding, implant assembly | 304 stainless, electropolished | Smooth surfaces, sealed joints |
| ISO 7 (Class 10,000) | Pharma production, biotech | 304 stainless or powder-coated steel | Chemical-resistant, easy to wipe down |
| ISO 8 (Class 100,000) | Gowning, packaging, general assembly | Powder-coated steel, laminate (sealed) | Non-porous, cleanable |
Industries We Serve
Pharmaceutical & Biotech
cGMP-compliant furniture for drug manufacturing, fill-finish, and QC labs.
Hospital Pharmacy
USP 797/800 compounding suite furniture, gowning benches, and pass-throughs.
Semiconductor & Electronics
ESD-safe workstations, perforated tables, and desiccator storage for fab environments.
Research Laboratories
BSL-3/4 lab furniture, tissue culture workstations, and cleanroom-rated casework.
Why Cleanroom Furniture Matters
Standard lab furniture sheds particles from unsealed edges, exposed fasteners, porous surfaces, and degrading finishes. In an ISO 7 cleanroom, a single standard lab bench can increase particle counts enough to push the room out of classification. Cleanroom-specific furniture is designed from the ground up to:
- Generate zero or near-zero particles under normal use
- Withstand aggressive cleaning agents (IPA, bleach, hydrogen peroxide vapor)
- Support unidirectional airflow patterns instead of disrupting them
- Minimize horizontal surfaces where particles accumulate
Free Cleanroom Layout Design
Send us your cleanroom dimensions, ISO classification, and workflow requirements — we’ll provide a free CAD furniture layout. Call 800-724-8037 or request a quote.