Semiconductor fabrication demands the cleanest manufacturing environments on earth — ISO 3 to ISO 5 spaces where a single particle can destroy a wafer worth thousands of dollars. The furniture inside these cleanrooms must meet two non-negotiable requirements: zero particle generation and full ESD protection. Labs USA supplies cleanroom workstations, fab tables, gowning room furniture, and storage systems designed for semiconductor and electronics manufacturing.
ESD-Safe Cleanroom Workstations
- Static-dissipative work surfaces — surface resistance 10⁶ to 10⁹ ohms per ANSI/ESD S20.20
- Grounded frames — all metal components bonded to facility ground
- ESD-safe laminate options — Chemsurf ESD, Trespa TopLab ESD, or stainless steel
- Wrist strap ground points — integrated into workstation frame
- Ionizer mounts — pre-drilled for overhead or tabletop ionizer bars
Fab-Floor Furniture
Wafer Handling Stations
- Perforated stainless steel tables allowing vertical laminar airflow
- FOUP (Front Opening Unified Pod) storage racks
- Reticle storage cabinets with ESD protection
- Microscope tables with vibration isolation
Wet Bench Support Furniture
- Chemical-resistant workstations adjacent to wet processing stations
- Polypropylene or PVDF construction for acid/solvent environments
- Integrated chemical storage below deck
Metrology & Inspection
- Vibration-isolated optical tables
- SEM/TEM support tables with pneumatic isolation
- Overhead shelving for test equipment and monitors
Gowning Room Furniture for Fabs
- Step-over benches — stainless steel with perforated seats for airflow
- Three-zone gowning rooms — street clothes zone, intermediate zone, cleanroom garment zone
- Garment storage — individual cubby shelving for cleanroom suits, hoods, and boots
- Air showers — positioned between gowning and fab entry
- Tacky mat frames — recessed into flooring at each zone transition
Desiccator & Dry Storage
- Nitrogen-purged desiccator cabinets for moisture-sensitive devices (MSD)
- Automated humidity control (1-5% RH)
- SMIF pod storage racks
- Cleanroom-compatible shelving for WIP (work in progress)
Material Considerations for Semiconductor Cleanrooms
| Requirement | Solution |
|---|---|
| Particle generation | Electropolished SS, fully welded joints, no exposed fasteners |
| ESD protection | Static-dissipative surfaces, grounded frames, wrist strap points |
| Outgassing | No paint, adhesives, or plastics that outgas VOCs in ISO 4-5 |
| Chemical resistance | 316L SS for acid environments; PP/PVDF near wet benches |
| Vibration | Pneumatic or active isolation for metrology stations |
Get a Quote
Tell us your ISO classification, ESD requirements, and fab layout — we’ll design the furniture configuration. Call 800-724-8037 or request a consultation.