Home / Shop
Exhaust Snorkel ESD
- Description
The ESD/EX Model
The ESD/EX model is designed for use in electronic environments where there is a risk of electrostatic discharges. Following the risk assessment, the ESD/EX can also be used for certain applications in explosive environments. The extraction arm is made of conductive materials, eliminating the risk of static electricity and sparks. The hood is made of anodized metal.
The new generation of Nederman BenchTop arms is available in 2, 3, and 4 in. (50, 75, and 100 mm) versions with corresponding capacity ranges of:
FX50- 2": 30-65 cfm (50-110 m3/h) Full Specs
FX75- 3": 65-140 cfm (110-240m3/h) Full Specs
FX100- 4": 120-265 cfm (200-450 m3/h) Full Specs
ESD
Used for non‐aggressive dust and fumes Can be used for certain EX applications
Typical Applications:
Electronics Manufacturing/Repair. Other applications where static electricity discharge is a concern
Material Construction:
Joints/Rings/locking rings/bearing swivel:
Polypropylene with glass fiber reinforcement,
conductive
Tubes: Aluminium, anodized 10 μm
Internal Spring: Stainless Steel
Competitor Comparison:
‐ Alsident: System 50/75/100, AS
‐ Fumex: TERFU ESD
50mm, 75mm, and 100mm diameters are available
Exhaust Snorkel Hoods
Aluminum Black Bell Hood
The powder-coated black metal hood is made of aluminum and is designed to capture contaminants. It is capable of handling aggressive fumes, high temperatures, corrosion resistance, and dust splatter.
It can be attached to the exhaust hood of any size articulating arm.
ABS Conductive Black Flange Hood
ABS Conductive Black Combo Hood
It can be attached directly to the lab exhaust snorkels regardless of the size of the arm.
Handles on both sides of the hood make it maneuver easier.
ABS Conductive Black Dome Hood
Dome hood is designed to be used with high-dispersion contaminants. The transparent hood is made of PET-G plastic.
It can be attached to the hood regardless of the size of the extraction arm.
Handles on both sides of the hood make it maneuver easier.
Drop Ceilings Installation
You need to add the “43+ inch additional tube extension” which can be cut down to size to go through the drop ceiling. You can also add the "ceiling cover plate" that will conceal the hole, but it is not required; it is only for aesthetic purposes.
Related Products
-
Exhaust Snorkel Chemical Resistant
$1,575.00Successfully Added to your Shopping CartAdding to Cart...
