Metal Laboratory Workspace
Labs USA Presents Laboratory Furniture For Steel Workspaces
Metal Laboratory Workspace features rugged, durable and heavy gauge steel with a smooth clean and easy to maintain surfaces.
SEFA approved manufacturing standards
Durable and built to last
Variety of colors available
Easily removable/replaceable cabinet bottoms
Adjustable leveling feet
Wall cases available in a solid door, framed hinged glass door and sliding glass door
Flush aluminum pulls double as label holders
Oven-baked Epoxy powder coated finish–chemical resistant
Full-extension ball-bearing drawer slides
Flush front or overlay construction styles available
Wall cases available in either 13″ or 16″ depths
Door and drawer heads are double pan construction and sound deadened
Hinges are five knuckles stainless steel type
Sink units have removable backs for easy replacement
Metal Casework Specifications
Metal Laboratory Workspace Order Menu
Metal Casework Cabinets
Standing height base cabinets are 34.75″ high and 22.375″ deep. Units are available in various widths as shown. Door units feature a single shelf as standard. All open units have 2 shelves. Additional shelves are available. Specify left- or right-hinged doors using the suffix “L” or “R”. If locks are required use the suffix “LK”. If finished Back is required use the suffix “FB”.
Metal Casework Vacuum Pump Cabinets
Vacuum Pump Cabinets come with a Polydamp Melamine Foam that has heat resistance and sound dampening qualities. This is
applied to the inside of the cabinet. (Please note actual cabinet depth with finished back will be 22.875” and 18.875”).
Metal Casework Mobile Cabinets
All cabinets are available in a mobile version. They come standard with a finished back and optional finished top. To specify a mobile cabinet use the prefix “M” to the base cabinet model number (example: SMB2724-110). They come standard with a 3″ caster. Cabinet depth with finished back is 22.812″. All mobile cabinets with drawers come standard with a tip resistant counter weight.
Hanging Casework Cabinets
All cabinets are available in a hanging version including low profile, sitting height , ADA height, and standing height (30.875″ high). To specify a hanging cabinet use the prefix “H” to the base cabinet model number (example: SHB2324-110). Low profile cabinets should be used for adjustable height work benches or table frames on casters to allow the caster to swivel if the adjustable leg is positioned in the lowest setting.
Additional shelves are available. Specify left- or right-hinged doors using the suffix “L” or “R” after the two digit depth number. Wardrobe cabinets are available by adding the suffix “W” to any of the standard part numbers. They will include one hanging bar in lieu of shelves. For pull out shelves add the suffix “PS”.
Casework Filler Panels
Base cabinet filler panels are available in 29″, 32″ and 35″ high. Floor case filler panels are available in 84″ high. They are all available in any width required by entering the dimension in lieu of the “XX” in the part number. Note: Base cabinets are 22.375″ deep.